F5021 51

Icom's F5021 VHF transceiver was created for light commercial use, large industry, and small-to-mid-sized public safety systems. It provides multichannel operation, customizable functions, improved external channel control, and wide frequency coverage in addition to straightforward safety features.

• Eight memory zones containing a total of 128 channels can be easily identified by their 8-character channel name and selected with the up/down buttons
• Customizes functions with 6 programmable buttons including a pair of up/down and P0-P3 function-assignable buttons; volume is adjusted by an independent knob
• Covers a range of VHF 136 - 174 MHz
• Constructed to MIL standard 810F with a durable aluminum die-cast chassis and polycarbonate front panel
• Built-in 2-tone, 5-tone, CTCSS and DTCS capabilities make it easy to set up talk groups with PTT ID and quiet stand-by for use when others are speaking
• Features of the built-in MDC signaling include: PTT ID (X/RX), radio stun (RX), emergency TX/RX (no ACK), 5 alias table (max), radio check (RX) and radio revive (RX) with the built-in MDC signaling
• Decodes up to ten 2-tone and eight 5-tone codes per channel - beep sound, answer back, bell icon, scan, and radio stun/kill/revive can by programmed for each code
• In the event that the radio is lost or stolen, the kill/stun function can be used to temporarily disable the device over the air - thus preventing security threats; a revive command or the unlock password can be used to return the radio to functionality
• Lone worker function sounds a beep after a preset period with a screen to push any button; if no buttons are pressed within a specified wait period, the radio will send an automatic emergency signal to inform coworkers that something may have happened to the individual worker
• Makes moving between workplaces easier with the mode dependent scan; in the mode-dependent setting, the scanning setting depends on the operating channel, when the operating channel is changed, the scanning list automatically changes to the list set for the new operating channel
• An optional unit can be added via connection to the 40-pin option slot
• Can be programmed to control an operating channel from an external device (up to 16 preprogrammed channels) with the use of an OPC-1939 D-Sub 15-pin ACC cable (not included)
• Compatible with F3021 and F4021 series handheld radios

Weight:
2.4 lb

Dimensions:
150 mm W x 40 mm H x 167.5 mm D

Frequency range:
136 - 174 MHz

Number of channels:
max. 128 ch/8 zones

Channel spacing:
12.5/25 kHz, 15/30 kHz

PLL channel step:
2.5 kHz, 3.125 kHz

Antenna impedance:
50 (SO-239)

Operating temp. range:
22°F to +140°F

Power supply requirement:
13.6 VDC

Current drain (approx.):
Tx 50W/45W 12.0A, Rx Max audio 1.2A, Stand-by 300 mA

Product Reviews