AERO553101

Aero-552 has been upgraded to our Aero-553. Aero-553 is our most sophisticated CO detector. Now it can read down to 10 Parts Per Million. Though the primary function of the unit is to monitor CO levels from as low as 30 ppm, there is a whole lot more to this new instrument. >

This latest CO detector from the CO Guardian family, with pleasing aesthetics and an easy to read LCD display, has been designed to replace a standard 2-1/4 instrument panel clock. This saves you the trouble of finding additional panel space to accommodate a stand-alone CO detector.

Carbon Monoxide detection	Detects CO from as low as 10 PPM. Display level from 10 PPM to 999 PPM. Unit will alarm if CO level exceeds 50-70 PPM for more than 5 minutes. Instant alarm if level exceeds 150 PPM. Is designed to meet FAR 23.831
Clock function	Shows Local Time and Zulu Time in a 24 hour format.
Flight Timer	Flight Timer starts automatically on Take off when 150 ft above runway level. It can also be started manually.
Stop Watch	Stop watch function lets you time any segment of your flight.
Inside / Outside Air Temp	Keeps track of inside and outside air temperature in both Fahrenheit and Celsius.
Battery Voltage	You get instant alert when battery voltage drops / rises above pre-set levels for 14 / 28 V systems.
Cabin Altitude	Monitors cabin altitude and sounds an alert when you climb above 10,000 ft , 12,500 ft ( > 30 mts ), and above 14,000 ft. This alerts the pilot to turn on the oxygen as may be required.
Density Altitude	The density altitude is indicated based on the absolute pressure and OAT.
RS 232 output	Interfaces with CNX 80 (software level 2.0 required) where you will get relevant indications/ alerts.
Remote light	Remote light can be mounted for CO alert and Altitude alert.

• Input power 9-30 VDC
• Power usage Less than 2 watts
• Temperature range 0C to 50C
• Humidity 5% to 95% (Non conpensating)
• Circuit Breaker 2 amps
• Interface: RS232 to the UPS CNX80 "CO Level, cabin temperature and cabin pressure" (Software level 2.0 required on your CNX 80)
• Size: Fits Standard 2/14 inch round panel cut-out and is 2 1/2 inch deep
• Weight 7.5 OZ
• Sensor: tested to 25,000 feet Calibration 100 and 500 PPM

Product Reviews